lesson 8
Gradient embellishment of a swimsuit with adhesive rhinestones
Комментарии
As an example, the video shows one of the most complex options - about 12 colors and shades are used on the swimsuit
The more colors - the more difficult it is to glue and the more expensive and beautiful the swimsuit looks.
The straps are unstuck in a stretched form with glue e6000 (or similar) approximately 16 cm in length from the cup (16 cm is also measured in the stretched video, but with natural, not maximum stretch) The skirt is also unstuck. It should be a logical continuation of the swimsuit.
After the swimsuit is glued, approved by the customer and more than 24 hours have passed since the last edits - the swimsuit must be warmed up (for example, in the oven). Everyone's oven is different and you need to determine at what temperature this should be done in your case.
To do this, take a small piece of fabric, glue a few rhinestones and put it in the oven for 15 minutes at 120 degrees along with a piece of silicone. The fabric and silicone should not deform.
Task 1.
Draw a life-size cup on a piece of fabric and lay out the design with rhinestones. In this task, it is important that you understand the principle and how it should look in the end.You take the design you have chosen and work with the rhinestones you ordered for this set.
After the layout is ready - evaluate your work, compare it with the work of a professional and correct the mistakes.
The more colors - the more difficult it is to glue and the more expensive and beautiful the swimsuit looks.
The straps are unstuck in a stretched form with glue e6000 (or similar) approximately 16 cm in length from the cup (16 cm is also measured in the stretched video, but with natural, not maximum stretch) The skirt is also unstuck. It should be a logical continuation of the swimsuit.
After the swimsuit is glued, approved by the customer and more than 24 hours have passed since the last edits - the swimsuit must be warmed up (for example, in the oven). Everyone's oven is different and you need to determine at what temperature this should be done in your case.
To do this, take a small piece of fabric, glue a few rhinestones and put it in the oven for 15 minutes at 120 degrees along with a piece of silicone. The fabric and silicone should not deform.
Task 1.
Draw a life-size cup on a piece of fabric and lay out the design with rhinestones. In this task, it is important that you understand the principle and how it should look in the end.You take the design you have chosen and work with the rhinestones you ordered for this set.
After the layout is ready - evaluate your work, compare it with the work of a professional and correct the mistakes.